.

Blog

Office division with transparent laminated glass in an apartment in Barcelona

Ascent facade material with elevator

Ascent facade material with elevator

Division composed of glass office on a floor

Division composed of glass office on a floor

Sliding door in the division

Sliding door in the division

Dispatch Division formed with glass and aluminum

Dispatch Division formed with glass and aluminum

Work done on the sixth floor of a block in the neighborhood of Barcelona Sagrera, which consisted of placing a divider that separated the living room of the office, consisting of glass and aluminum U- profiles. To do this we had to raise large volume glass facade through a lift, as shown in the first image. The division was formed by two side elements, one of them at 90 degrees, and a sliding door sliding through KLEIN type guide. The glass was laminated 4+4 transparent, in order to gain the maximum natural light into the office, as well as provide the necessary security to the structure due to the laminated glass. The aluminum profiles was in white lacquer finish. The joints were sealed with transparent and black silicone neutral high end. The shooter or hangnail was placed on the same floor using a special sealant based anaerobic UV rays, which is welded to glass in seconds. This work was installed by three workers in a morning chore, thanks largely to the help of the elevator, which provides speed, security and professionalism. For any queries please contact us, we will respond without compromise.

This Post Has 0 Comments

Leave A Reply