.

Blog

Lacquered aluminum divider between terraces in Barcelona

Old rusty iron partition structure

Old rusty iron partition structure

New aluminum structure in white lacquered

New aluminum structure in white lacquered

Work done in the neighborhood of Barcelona Sagrera. It consisted of the manufacture and installation of a dividing structure between terraces located in an attic of an apartment building. As we see in the first photo, the old division was in very poor condition, since iron was painted outdoors with time has been rusting, deteriorating turn the wall where I was staying. We did replace it with an aluminum structure in white lacquered finish, made with the Stilo-50 series with daffodils in the form of half-round, with the same design formed by fixed vertical divisions of the armed type glasses. The glasses were sealed with silicone neutral black color.  The main advantage of aluminum to iron is that it needs no maintenance and does not rust, thus avoiding damaging the walls where it is installed. Another advantage is that it weighs considerably less, thereby lighten the weight the structure block of flats. It was screwed at various points to prevent the wind weakens over time, and maintain solid structure over the years. This work was installed by three workers on a morning job, and did not involve any added difficulty was not anticipated. As we are manufacturers, we can create the desired structure in different materials (aluminum , iron, stainless steel), within which different finishes. 

This Post Has 0 Comments

Leave A Reply